Managing stock to meet customer needs: A McDonald’s Restaurants case study
McDonald’s is one of only a handful of brands that command instant recognition in virtually every country in the world. It has more than 30,000 restaurants in over
19 countries, serving around 50 million people every day. All businesses face challenges every day. One of the major challenges facing McDonald’s is managing stock. Stock management involves creating a balance between meeting customers’ needs whilst at the same time minimizing waste. Waste is reduced by:
1. Accurate forecasting of demand so that products do not have to be thrown away as often.
2. Accurate stock control of the raw materials.
Stock management involves creating a balance between meeting customers’ needs whilst at the same time minimizing waste. This is an increasingly tough balancing act. As customer tastes change, McDonald’s needs to increase the range of new products it offers, so the challenge of reducing waste becomes even greater.
Why change was needed
In the past, stock ordering was the responsibility of individual restaurant managers. They ordered stock using their local knowledge, as well as data on what the store sold the previous day, week and month. For example, if last week’s sales figures showed they sold 100 units of coffee and net sales were rising at 10%, they would expect to sell 110 units this week. However, this was a simple method and involved no calculations to take account of factors such as national promotions or school holidays. It took up a lot of the Restaurant Manager’s time, leaving them less time to concentrate on delivering quality food, service and cleanliness in the restaurants.
The new system
In 2004, McDonald’s introduced a specialist central stock management function known as the Restaurant Supply Planning Department. This team communicates with restaurant managers on a regular basis to find out local events. The team builds these factors into the new planning and forecasting system (called Manugistics) to forecast likely demand of finished menu items (e.g.Big Macs).
This case study looks at how McDonald’s manages its stock through its management systems and what benefits this brings.
Types of stock
Stock is the physical product a company buys, creates or sells. Every business has three main types of stock:
The raw materials are the ingredients that will go into producing the finished product. For McDonald’s, these will include the buns, beef patties, paper cups, salad ingredients and packaging. These are delivered to the restaurants between 3 and 5 times a week. The raw materials arrive together on one lorry with three sections so that each product can be stored at a suitable temperature.
The three sections are:
· ambient — which means foods that can be stored at room temperature (coffee or sugar packets).
Work-in-progress refers to stocks that are in the process of being made into finished product. A Big Mac consists of a bun, two beef patties, lettuce, cheese, pickles, onions, sauce and a small amount of seasoning. The restaurant will only combine these items just before the customer orders them so the Big Macs are hot and fresh when served.
Finished products are goods that are ready for immediate sale to a customer. At any one time, a restaurant will have a range of products ready for sale. Many of these will include finished products like Filet-o-Fish, Big Macs and side salads.
At McDonald’s, all raw materials, work-in-progress and finished products are handled on a First In, First Out (FIFO) basis. This means raw materials are used in the order they are received. Therefore stock is always fresh because products are sold in the order they are made. If the process First In, Last Out (FILO) was used, then the finished product would be dry and unappealing because the first one prepared is the last one sold.
Holding too much stock carries costs, so McDonald’s runs a lean stock control to save money. Stock management is the process of making sure there is enough stock at all times to meet customer demands whilst minimising expensive waste.
Planning and managing supply
Ongoing communication between the central Restaurant Supply Planning team and individual restaurants helps to manage the stock more effectively. A mixture of specialist stock controllers and employees who previously worked in the restaurants makes up the central team. This team of 14 regional planners works with around 80 restaurants each and communicates on a regular basis with them via email/telephone. Anything that would affect the number of customers visiting their restaurant needs to be logged with the team. This is taken into account in the calculating of the forecasts. Supply Planners work with the new stock control system, Manugistics, to ensure enough raw materials, e.g. beef, tomatoes, lettuce, etc., leave the McDonald’s distribution centres, such as Basingstoke. This ensures restaurants can produce the meals required for the level of demand forecasted.
A forecast is an estimate of future sales of finished products. Forecasts are calculated using:
· store-specific historic product mix data from the last two years
· store-specific and national causal factors. These specify dates for events such as national promotions & school holidays
· information from store managers about factors that might affect emand, e.g. road closures or local events & promotions.
Supply Planners working for McDonald’s include a range of causal factors in the calculation of the forecasts, so that based on past performance they can predict future demand for each restaurant. For example, Big Mac sales increase during a ‘Buy One Get One Free (BOGOF)’ promotion. The planners use this data in the forecasts for all stores that took part in that promotion. Analysing how weather affects demand for particular products, such as McFlurrys and salads, can also be built into the model. The forecasts then become more accurate, decreasing costs and improving customer satisfaction.
Stock control charts
A stock control chart shows the balance of orders for new stocks against sales. The system is dependent on figures for expected sales. For example, if sales of burgers are going out of the system, then stocks of beef patties need to be coming into the system. Manugistics uses two years’ worth of product mix history to produce forecasts for each restaurant. This uses time series analysis. The planner will apply a causal factor (the blue blocks in the example) to the time series for the start and end date of this promotion. Using complex calculations, the graph then produces a forecast – seen below circled red.
Any system is only as good as the data that is provided. Therefore, McDonald’s Restaurant Managers need to ensure that the data they enter into the system is as accurate as possible. For example, each day, Restaurant Managers record opening and closing stocks of key food items. They record all other items weekly. The store computer system identifies any stock count deviations from the last stock count so managers can investigate. For example, the manager may have missed off a box of organic milk whilst counting them earlier on in the shift.
Restaurants hold a small buffer stock. This is an extra quantity of stock held to meet unexpected higher demand. It is also the point at which more goods are ordered the re-order level.
McDonald’s store managers use a simple web-based communication tool called ‘WebLog’ to view and amend store Order Proposals. Every day WebLog creates a proposed order for the manager to analyse and amend if necessary. WebLog enables managers and central planners to see what quantities have been ordered, what the current stock levels are and exactly how much stock is due to be delivered at a particular time.
In the past, managers would have had to check their delivery for any shortages and input every item they had received. The system now automatically generates a delivery note that gives the exact quantities and descriptions of the delivery. All managers need to do is simply click ‘confirm’ on WebLog. This saves time and makes the process more cost-effective.
Benefits to customers and restaurants
The centralized stock management system generates many benefits. Many of these are for restaurants and Restaurant Managers. However, customers also benefit through improved customer experience customers can eat a quality product, in a clean environment, when they want it.
1. Restaurants avoid running out of stock. As a result, customers can always receive what they order.
2. The system eliminates inexperience in the ordering. The system enables staff to ensure that the order is right first time.
3. Time saved in ordering as the system calculates how much is required.
4. Orders are based on the current stocks. The Restaurant Manager simply inputs the current stock level.
5. Less waste means food costs are reduced. This cost saving is then passed on in better value for money for customers.
6. The amount of stock ordered for promotions is more accurate, being based on past performance.
7. There is a reduction in the need for emergency deliveries, saving money.
8. Stock levels are always at optimum level, helping to ensure sales and the freshest product.
9. Stock can be reduced automatically at the end of a promotion, avoiding too much stock.
Because McDonald’s has taken much of the hard work out of stock management, Restaurant Managers are able to spend more time focusing on delivering McDonald’s high standards of Quality, Service and Cleanliness. Customers are happy because they can be sure the item they want is on the menu that day. Efficient stock management is essential to any business. It enables the business to operate in a responsible way. The system also minimizes waste. Efficient use of materials means that society’s resources are being used well with very few waste products. For example, fewer materials end up as waste in landfill sites. This leads to a reduction in costs. Due to lower costs, McDonald’s can pass the benefits on to customers, providing better service and lower prices. The reduction of waste provides a win/win/win situation for McDonald’s, its customers and wider society.
1. In review of this case study specific to sales and operations planning around McDonald’s. Please provide examples of Predictable variability around the product line offered by McDonald’s. What is the process to ensure that individuals are never turned away when ordering a specific item?
2. Offer examples how McDonald’s manage supply using the principle: Capacity, inventory, or subcontracting.
3. Does McDonald’s use aggregate planning within sales and operations? If yes, please provide examples how this is achieved?
4. From the aggregate planning strategies reviewed from the text/slides:
a. Chase Strategy
b. Level Strategy
c. Mixed Strategy
Please advise which strategy or combinations of strategies McDonald’s is utilizing within this case study.
1. Please find and select a journal article, news article or other reputable source covering contemporary offshoring. The selection is up to the student.
MUST BE ABLE TO CITE APA FORMAT
Please summarize the article and formulate the following 3 questions if applicable (estimated at 200 words per response):
1. Why was the decision made to tax offshoring profits for U.S. multinational firms?
2. Where there any benefits or downfalls experienced from the decision to move toward offshoring or lack of move to offshoring?
3. What would your direction be as a supply chain/operations manager given the details you are provided?